ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Distributor Plate W/ Pick-up Sensor > < Ignition Rotor - Alignment Procedure|Page 428
Page 3
background image

FIGURE 13

6.

If the vehicle is a 1983 model equipped with a 5.0L engine, coat the rotor with silicone grease as shown in Figure 13.

7.

Reinstall distributor cap and rotor making sure wires are firmly seated in the distributor cap terminal housings and on the spark plugs.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Distributor Plate W/ Pick-up Sensor > < Ignition Rotor - Alignment Procedure|Page 428