E 150 Van V8-351 5.8L (1982)
FIGURE 29
4.
Grind .0625" (1/16 inch) off entire flange radius of air pump adjustment arm (Figure 29). Ensure there are no sharp burrs remaining.
5.
Install air pump adjustment arm and install alternator and air pump drive belts by reversing procedure of steps 1 through 3.
6.
Tension alternator belt 110-130 lbs. and tension air pump belt 80-100 lbs.
7.
Torque bolts as follows: adjustment slot bolts (alternator and air pump); 24-34 ft.lbs. Air pump pivot bolt; 35-50 ft.lbs. Alternator pivot bolt;
45-55 ft.lbs.
8.
Start engine to ensure noise has been eliminated and that all accessory drive components are positioned and functioning properly.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP9452A83
TIME:
0.4 Hr. DLR. CODING: Basic Part No. 9B452 Code: 16
