ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Choke - Cold Stall Upon Initial Engagement|Page 5535 > < Door Handle - Push Button Binds
Page 1
background image

Choke Pull-off: All Technical Service Bulletins
Choke - Cold Stall Upon Initial Engagement

Article No. 84-24-11

STALL - COLD (5.8L-4V) OR UPON INITIAL ENGAGEMENT

LIGHT TRUCKS 1984-85 E, F, AND BRONCO

CALIBRATIONS: 4-64G, Z

When the above conditions are reported, attention should be given to accurate adjustment of the choke pulldown setting. The adjustment procedure for
this setting is found in the 1984 Shop Manual, Emission Diagnosis Volume HT, page 4-95. The nominal specification for the gap setting is 0.185 inches.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Choke - Cold Stall Upon Initial Engagement|Page 5535 > < Door Handle - Push Button Binds