E 150 Van V8-351 5.8L VIN G 2-bbl (1984)
f.
Behind Rear Wheelhouse on Floor
g.
Around Fuel Filler Housing on Floor
h.
Base of Rear Cargo Doors on Floor
i.
Rear Corners of Floor
j.
Miscellaneous - All Window and Door Weatherstrips
SEALING MATERIALS
A list of sealing materials is shown below.
1.
Silicone Rubber Adhesive
^
Clear - Ford (D6AZ-19562-AA) or 3M 08661
^
Black - Ford (D6AZ-19562-BA) or 3M 08662
These are rapid curing adhesives/sealants formulated for such uses as sealing leaks, remounting trim and servicing torn weatherstripping adheres to a
wide variety of surfaces.
2.
Weatherstrip Adhesive
^
Yellow Colored - Ford (E8AZ-19552-A)
This adhesive holds weatherstripping on doors, bodies, cowl ventilators and other locations. It is used to service loose weatherstripping or install new
weatherstripping. It is also used to bond numerous rubber-to-metal, rubber-to-wood, rubber-to-cardboard and rubber-to-rubber surfaces. It stops leaks in
windows set in rubber mouldings. It sets up fast.
3.
Joint and Seam Sealer
^
White - 3M 08646 (Cartridge Type)
^
Black - 3M 08648 (Cartridge Type)
This joint and seam sealer is a firm setting, but flexible sealer for interior and exterior body joints and seams. Typical applications are in floor and
wheelwell areas. It skins over quickly and can be painted in about 30 minutes.
WET AREAS - ILLUSTRATIONS
Water entry in the front door step well (Wet Area A) may be from the locations.
