E 150 Van V8-351 5.8L VIN G 2-bbl (1984)
SERVICE RECALL 479 ATTACHMENT I
TECHNICAL INSTRUCTIONS
SEE ATTACHMENT I FOR DESCRIPTION AND LOCATION OF COMPONENTS
1.
Park vehicle and set parking brake. Note - If vehicle has body installed, it may be necessary to perform brake tube replacement with vehicle on a
hoist.
*
2. Remove brake tubes between Point "A" and Point "B". Refer to the Attachment I illustration.
3.
Install new brake tubes, 1 each E4US-2B112-AB (Rear Brake Tube) and E4US-2B112-BC (Front Brake Tube).
^
Rear brake tube (-AB) goes from front of reservoir to rear of proportioning valve.