E 150 Van V8-351 5.8L VIN G 2-bbl (1984)
EMISSIONS RECALL U-7KEXHIBIT I
Technical and Administrative Instructions
Inspect (See Exhibit I)
1.
Raise the hood.
2.
Locate the choke control relay assembly mounted on the inside of the left (driver side) fender apron.
3.
Check the four wires from the wire loom to the choke relay connector for color. If the wire colors are black, black with yellow stripe, white with
black stripe and red with white stripe, the proper loom has been installed and no further action is required. If there are two white with black stripe
wires in the connector continue with the following steps.
