E 150 Van V8-351 5.8L VIN G 2-bbl (1984)
-
Place A/C Heat selector to "OFF" (if equipped).
-
Disconnect and plug vacuum hoses at air bypass valve, EGR valve, and purge control valve.
-
Place the transmission in the specified gear. See: Specifications
-
Check curb idle rpm. Adjust to specification. See: Specifications
-
Place the transmission in Neutral (manual) or Park (automatic). Rev the engine momentarily. Place the transmission in specified position, and
recheck curb idle rpm. Readjust if required.
-
If vehicle is equipped with A/C, perform the following additional steps:
-
Connect an external vacuum source providing a minimum of 33.7 kPA (10 in-Hg) to the Vacuum Operated Throttle Modulator (VOTM)
kicker.
-
Place the transmission selector in specified position. See: Specifications
-
Check/adjust VOTM kicker speed. If adjustment is required, loosen kicker locknut and turn kicker to required speed, tighten locknut.
-
Remove plugs and reconnect vacuum hoses.
