ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Choke Pull-off: > < Choke Plate Pulldown|Page 3656
Page 1
background image

Choke Pull-off: Customer Interest
Choke - Cold Stall Upon Initial Engagement

Article No. 84-24-11

STALL - COLD (5.8L-4V) OR UPON INITIAL ENGAGEMENT

LIGHT TRUCKS 1984-85 E, F, AND BRONCO

CALIBRATIONS: 4-64G, Z

When the above conditions are reported, attention should be given to accurate adjustment of the choke pulldown setting. The adjustment procedure for
this setting is found in the 1984 Shop Manual, Emission Diagnosis Volume HT, page 4-95. The nominal specification for the gap setting is 0.185 inches.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

All Technical Service Bulletins for Choke Pull-off: > < Choke Plate Pulldown|Page 3656