E 250 V10-6.8L VIN S (2005)
Antenna, Radio: Service and Repair
ANTENNA
Removal
1. Remove the radio antenna mast from the antenna base (fixed mast type shown, 3-step telescoping type similar).
2. Remove the antenna base.
1
Remove the radio antenna base cap.
2
Remove the screws.
3
Lift the antenna base.
4
Disconnect the radio antenna lead in cable from the antenna base and remove the antenna base.
3. Remove the fender splash shield.
1
Remove the screws.
2
Remove the pushpin and remove the fender splash shield.
