E 250 V10-6.8L VIN S (2005)
1. Lubricate the piston boot, caliper piston, piston seal and caliper bores with clean brake fluid.
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot on the piston.
3
CAUTION: Be careful not to damage or dislodge the piston seal.
Insert the caliper piston.
4
CAUTION: Be careful not to cock the caliper piston.
Position the boot in the bore, and press the caliper piston into the bore.
5
Install the piston boot retainer.
3. Install the disc brake caliper.
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate-E-250, E-350
Removal and Installation
1. Remove the brake pads.
2. Remove the anchor plate bolts and remove the rear disc brake caliper anchor plate.