E 250 V10-6.8L VIN S (2005)
19. Connect the heated PCV tube and engine vacuum harness.
20. Connect the Throttle Position (TP) sensor electrical connector.
^
Push in the red clip.
21. Connect the electronic Throttle Body (TB) electrical connector.
^
Push in the red clip.
22. Install the upper radiator hose.
23. Connect the fuel hose spring lock couplings.
24. Install the generator.
25. Connect the battery ground cable.
26. Install the engine cover.
27. Install the air cleaner assembly and tubes.
28. Fill the cooling system.
