E 250 V10-6.8L VIN S (2005)
Exhaust Manifold: Service and Repair
Exhaust Manifold RH
Exhaust Manifold RH
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the engine cover.
3. Remove the nuts.
4. NOTE: During installation tighten the exhaust manifold nuts in the sequence shown.
Remove the 10 nuts, the exhaust manifold, and the exhaust manifold gasket.
^
Discard the exhaust manifold gasket.
5. Clean and inspect the exhaust manifold.
6. To install, reverse the removal procedure.
^
Install a new exhaust manifold gasket.