E 250 V10-6.8L VIN S (2005)
Housing Assembly HVAC: Service and Repair
Removal and Installation
Plenum Chamber
PLENUM CHAMBER
Removal and Installation
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Instrument
Panel, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
2. Disconnect the vacuum hose connector.
3. Disconnect the vacuum hose.
4. Remove the plenum chamber.
1
Remove the screws.
2
Remove the plenum chamber.
5. To install, reverse the removal procedure.
Evaporator Core Housing
EVAPORATOR CORE HOUSING
Removal and Installation
1. Remove the heater core housing.