E 250 V10-6.8L VIN S (2005)
1. Install a new TB gasket. Install the TB and bolts. Tighten the bolts in two stages.
-
Stage 1: Tighten to 10 Nm (89 lb-in).
-
Stage 2: Tighten an additional 90 degrees.
2. Connect the TP sensor electrical connector.
-
Push back the red clip.
3. Connect the electronic TB electrical connector.
-
Push back the red clip.
4. Install the engine air cleaner assembly and the air cleaner outlet tube.
5. Install the engine cover.
6. Connect the battery ground cable.
