E 250 V10-6.8L VIN S (2005)
Headlamp Switch: Service and Repair
HEADLAMP SWITCH
Removal and Installation
1. Disconnect the battery.
2. Pull headlamp knob to HEAD position.
3. Insert a small screwdriver onto clip and pull clip and knob outward, removing headlamp knob.
4. Remove headlamp switch bezel by turning it counterclockwise.
5. On vehicles with tilt column, position steering wheel in full down position.
6. On vehicles with column shift, set parking brake and position shift lever to the lowest position.
7. Remove audio unit.
8. Remove 2 screws above instrument cluster.
