E 250 V10-6.8L VIN S (2005)
Transmission Speed Sensor: Service and Repair
TorqShift
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Install a suitable high-lift transmission jack.
3. Remove the two wire harness retainers from the rear crossmember and position the wire harness out of the way.
4. Remove the LH crossmember nuts.
5. Remove the LH crossmember bracket.