E 250 V10-6.8L VIN S (2005)
7. CAUTION: Do not damage the wheel bearing oil seal.
Remove the axle shaft.
Installation
1. Lubricate the lip of the wheel bearing oil seal with grease.
2. CAUTION: Do not damage the wheel bearing oil seal. Install the axle shaft.
3. CAUTION: Do not damage the rubber O-ring in the U-washer groove.
Install the U-washer.
1. Position the U-washer in the groove of the axle shaft.
2. Pull the axle shaft outward.
4. Install the differential pinion shaft.
1. Align the hole in the differential pinion shaft with the case lock bolt hole.
2. Install a new differential pinion shaft lock bolt.