E 250 V8-4.6L SOHC VIN W (2004)
19. Remove the sliding door upper roller hinge trim cover, if equipped with the sliding door.
1
Remove the screw.
2
Remove the upper roller hinge trim cover.
20. Open the sliding door and loosen the sliding door upper garnish moulding, if so equipped.
21. NOTE: LH upper front body side trim panel shown. RH side similar.
Remove the upper body side trim panels at the headliner.
22. Remove the rear cargo lamp.
-
Disconnect the electrical connector at the B-pillar.
23. Remove the rear headliner attaching pushpins.
24. Pull the headliner from underneath the door opening weatherstrips.
Front and Rear