E 250 V8-4.6L SOHC VIN W (2004)
Cruise Control Servo Cable: Service and Repair
SPEED CONTROL CABLE
REMOVAL
1. Remove the engine air cleaner.
2. Remove the air cleaner outlet tube.
3. Remove the accelerator control splash shield.
4. Disconnect the speed control cable.
1
Disconnect the speed control cable from the throttle body cam.
2
Squeeze the retaining tabs and remove the speed control cable.
5. Remove the speed control cable bracket from the thermostat housing.
1
Remove the bolt.
2
Remove the speed control cable bracket.
