E 250 V8-4.6L SOHC VIN W (2004)
12.
Tighten the feed bolts. See Figure 59.
13.
Install the No.5 bearing onto the center shaft assembly using petroleum jelly. See Figure 60. [NEW]
14.
Install the center shaft and ring gear. See Figure 61.
12.
Tighten the feed bolts. See Figure 59.
13.
Install the No.5 bearing onto the center shaft assembly using petroleum jelly. See Figure 60. [NEW]
14.
Install the center shaft and ring gear. See Figure 61.