E 250 V8-4.6L VIN W (2006)
Front Door Window Motor: Service and Repair
Front Door Window Regulator and Motor
FRONT DOOR WINDOW REGULATOR AND MOTOR
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the front door window glass.
2. If equipped, remove the window regulator motor.
3. Using a drift, carefully remove the center pins from the rivets.
4. NOTE: Avoid enlarging the sheet metal holes in the door inner panel.
Using a 1/4-inch diameter drill, drill out the rivets attaching the window regulator lower bracket to the inner panel.