E 250 V8-4.6L VIN W (2006)
3. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed,
install a new shoulder safety belt guide.
Remove the front shoulder safety belt guide cover.
4. Remove the shoulder safety belt guide.
1
Remove the shoulder safety belt guide nut.
-
To install, tighten to 48 Nm (35 lb-ft).
2
Remove the shoulder safety belt guide.
5. On a rear safety belt retractor and tongue with a flip-up shoulder safety belt guide cover, remove the shoulder safety belt guide.
1
Lift the shoulder safety belt guide cover.
2
Use the Safety Belt Bolt Torx Bit to remove the bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
3
Remove the shoulder safety belt guide.