E 250 V8-4.6L VIN W (2006)
personal injury.
Remove the 2 bolts and recliner.
To install, tighten to 48 Nm (35 lb-ft).
9. To assemble, reverse the disassembly procedure.
Seat Backrest - Second Row, Bucket
SEAT BACKREST - SECOND ROW, BUCKET
Disassembly and Assembly
All seats
1. Remove the rear quad bucket seat from the vehicle.
2. Remove the rear quad bucket seat backrest.
3. NOTE: If the same armrest is being installed, the armrest plate and bolt can be reused but a new crown washer must be used.
Remove the armrest.
1. Pull back the armrest cover, release the hook and loop strip and expose the bolt.
2. Remove the armrest bolt and the crown washer.
-
To install, tighten to 35 Nm (26 lb-ft).
3. Remove the armrest.
