E 250 V8-4.6L VIN W (2006)
Seat Track: Service and Repair
Seat Track - Second Row, Bucket
SEAT TRACK - SECOND ROW, BUCKET
Removal and Installation
1. Remove the affected rear seat quad bucket from the vehicle.
2. Remove the rear seat quad bucket backrest.
3. Remove the lower anchors and tethers for children (LATCH).
1. Remove the LATCH attachment bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
2. Unlatch the J-clips on the LATCH cover.
3. Remove the LATCH.
4. Remove the 4 nuts (2 shown) and the seat support.
-
To install, tighten to 25 Nm (18 lb-ft).
