E 250 V8-4.6L VIN W (2006)
Brake Caliper: Service and Repair
Brake Caliper Support Bracket, Rear
Brake Caliper Support Bracket E-250, E-350
Brake Caliper Support Bracket E-250, E-350
Removal and Installation
1. Remove the brake caliper anchor plate.
2. Remove the brake disc and hub.
3. Remove the parking brake shoes.
4. Disconnect the parking brake cable and conduit.
5. Remove the 4 brake caliper support bracket nuts.
^
To install, tighten to 135 Nm (100 ft. lbs.).
6. To install, reverse the removal procedure.
