E 250 V8-4.6L VIN W (2006)
Brake Hose/Line: Description and Operation
Brake Tubes and Hoses
CAUTION: Never use copper tubing to replace hydraulic brake line. Copper may fatigue, crack or corrode, which could result in brake line failure.
The brake lines and hoses transmit the hydraulic pressure to the wheel brake assemblies.
All brake lines must be correctly double-flared to provide strong, leak proof connections. When bending brake tube to fit the underbody or rear axle
contours, be careful not to kink or crack the brake tube.
When routing a brake tube, allow 51 mm (2 inches) of clearance between the brake tube and the exhaust system or any moving components.
If a section of brake tube is damaged, the entire section must be replaced with a brake tube of the same type, size, shape and length as originally
installed.
When installing new hydraulic brake tubes, hoses or connectors, tighten all connections securely. When the installation is complete, bleed the brake
system.
