E 250 V8-4.6L VIN W (2006)
7. If equipped, connect the underbody splash shield to the shroud.
8. NOTE: If necessary, install new appropriately sized worm drive-type clamps.
Connect the radiator upper hose and the overflow hose to the radiator.
9. CAUTION: The coolant hose must be mounted in the lower hole and power steering hose in the upper hole or damage to the hoses can occur.
Connect the coolant degas bottle and power steering hose to the shroud.
10. Install the air cleaner assembly. For additional information, refer to Fuel Delivery and Air Induction.
11. Fill and bleed the engine cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding.
