E 250 V8-4.6L VIN W (2006)
3. Position the valve cover on the cylinder head, and install the fasteners loosely.
4. Tighten the valve cover fasteners in the sequence shown.
^
Tighten to 10 Nm (89 inch lbs.).
5. NOTE: Rotate the PCV valve clockwise to lock it in place.
Install the PCV valve, position the PCV tube and connect the quick connect couplings. For additional information, refer to Fuel Delivery and Air
Induction.
6. Position the fuel charging wiring harness and connect the retainers to the valve cover studs.
7. Position the bracket, and install the ground strap and the nut. Connect the electrical connectors to the bracket.
^
Tighten to 25 Nm (18 ft. lbs.).
