E 250 V8-4.6L VIN W (2006)
^
Tighten to 25 Nm (18 ft. lbs.).
Windsor engine (5.4L)
14. Install the 2 heater outlet tube studs.
^
Tighten to 40 Nm (30 ft. lbs.).
All engines
15. Connect the coolant hose to the heater outlet tube.
16. Install the wiring retainers in the heater outlet tube bracket.
1
Install the KS electrical connector retainer.
2
Install the engine harness routing clip retainer.
17. Install the retainers and the shield.
18. Install the fan shroud and the engine cooling fan. For additional information, refer to Cooling System.
19. Install the intake manifold.