2006 E 250 V8-46L Timing Cover Component Specifications
22. Remove the front 4 oil pan bolts.
23. Remove the bolts.
24. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools
cause scratches and gouges which make leak paths. Use a plastic scraping tool to clean sealing surfaces.
Remove the engine front cover from the front cover to cylinder block dowel.
^
Discard the engine front cover gasket.
^
Clean the mating surfaces with silicone gasket remover and metal surface prep. Follow the directions on the packaging.
^
Inspect the mating surfaces.
Installation