E 250 V8-4.6L VIN W (2006)
20. Disconnect the evaporator outlet fitting.
-
Discard the O-ring seal.
-
To install, tighten to 39 Nm (29 lb-ft).
21. Disconnect the high-pressure cutoff switch electrical connector.
22. NOTE: Vehicle without auxiliary A/C shown, vehicles with auxiliary A/C similar.
Disconnect the compressor manifold and tube suction fitting.
1
Remove the screw.
2
Disconnect the fitting.
-
Discard the O-ring seal.
-
To install, tighten the fitting to 47 Nm (35 lb-ft).
-
To install, tighten the screw to 2 Nm (18 lb-in).
Vehicles with auxiliary A/C