E 250 V8-4.6L VIN W (2006)
Headlamp Bulb: Service and Repair
HEADLAMP BULB
Removal and Installation
WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped.
Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may result in
personal injury.
NOTE:
-
The headlamp bulb should not be removed from the headlamp until just before a replacement bulb is installed. Removing the bulb for an extended
period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector.
Never turn on the headlamps with the bulb removed from the headlamp.
-
Bulbs No. 9004 and No. 9007 look similar, but are not interchangeable.
1. Remove the headlamp assembly.
2. Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove the headlamp bulb.
3. To install, reverse the removal procedure.
