E 250 V8-4.6L VIN W (2006)
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power
steering components can result.
1. Compress the clamp and disconnect the steering gear-to-fluid cooler return hose from the power steering fluid cooler.
2. Disconnect the steering gear-to-fluid cooler return hose fitting from the steering gear and remove the hose.
^
Remove and discard the O-ring seal.
^
To install, tighten to 20 Nm (15 ft. lbs.).
