E 250 V8-4.6L VIN W (2006)
2. Remove the rear hub seal and the inner rear wheel bearing.
^
Discard the rear hub seal.
3. If not done previously, remove the bolts and separate the rear hub from the brake disc.
4. Clean all the old grease and axle lubricant out of the rear hub.
5. Remove the inner and outer bearing cups.
1
Use special tools 205-277 and 205-153 to remove the inner bearing cup.
2
Use special tools 205-275 and 205-153 to remove the outer bearing cup.
6. Clean the following components:
^
The rear axle housing spindle.
^
All the old grease and axle lubricant from the rear hub.
^
The rear wheel bearings and cups.
