E 250 V8-4.6L VIN W (2006)
flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
-
Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting any of the fuel lines
or fuel system components, the fuel system pressure must be relieved. Failure to follow these instructions may result in personal injury.
1. Remove the fuel rail.
2. Remove the 8 fuel injectors from the fuel rail.
3. Remove and discard the O-ring seals from each fuel injector.
-
Lubricate the new fuel injector O-ring seals with clean motor oil.
4. CAUTION: Check for fuel leakage after installation is complete.
NOTE: Be sure the 8 fuel injectors and the fuel rail are fully seated.
To install, reverse the removal procedure.
