E 250 V8-4.6L VIN W (2006)
Air Bag: Service and Repair
Driver Air Bag Module
Driver Air Bag Module
REMOVAL AND INSTALLATION
Removal
WARNING: Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
WARNING: Always carry or place a live air bag module with the air bag and deployment door/trim cover/tear seam pointed away from the body. Do
not set a live air bag module down with the deployment door/trim cover/tear seam face down. Failure to follow these instructions may result in serious
personal injury in the event of an accidental deployment.
WARNING: Never probe the electrical connectors on air bag, safety canopy or side air curtain modules. Failure to follow this instruction may result
in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
WARNING: Do not repaint air bag modules with discolored or damaged trim covers or deployment doors; new air bag modules must be installed.
Failure to follow this instruction may result in the air bag deploying incorrectly, which increases the risk of serious personal injury or death in a crash.
NOTE: The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON.
NOTE: The supplemental restraint system (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
