E 250 V8-4.6L VIN W (2006)
4. NOTE: During air bag module installation, make sure all the deployment door tabs are fully seated into the I/P.
When all tabs and locators are aligned, slide and engage the passenger air bag module into the instrument panel.
5. Install the 2 passenger air bag module bolts.
-
Tighten bolts to 8 Nm (71 lb-in).
6. Connect the passenger air bag module electrical connector.
7. Install the inner RH lower instrument panel reinforcement mounting bracket and the 6 bolts.
8. Install the RH lower instrument panel reinforcement and the 4 bolts.
9. Install the RH lower instrument trim panel.
10. Repower the system.