E 250 V8-4.6L VIN W (2006)
17. NOTE: Seat with inboard side shield shown, seat without inboard side shield similar.
Remove the safety belt buckle and pretensioner bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
18. Route out the wire harness and remove the safety belt buckle and pretensioner assembly.
19. To install, reverse the removal procedure.
20. Install the seat with the affected safety belt buckle pretensioner.
21. Repower the SRS.
22. Check the active restraint system for correct operation.
