E 250 V8-4.6L VIN W (2006)
3. Disconnect the front impact severity sensor electrical connector.
4. Lower the front air foil to access front impact severity senor bolts.
5. WARNING: The tightening torque of the air bag front impact severity sensor retaining bolt is critical for correct system operation.
NOTE: Make sure the radiator support and front impact severity sensor mating surfaces are clean and free of foreign material.
Remove the 2 bolts and the front impact severity sensor.
-
To install, tighten to 12 Nm (9 lb-ft).
6. To install, reverse the removal procedure.
7. Repower the system.