E 250 V8-4.6L VIN W (2006)
Spindle: Service and Repair
Wheel Spindle
Special Tool(s)
Removal and Installation
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in major
service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement part of lesser
quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
All vehicles
1. Remove the brake disc.
2. Disconnect the speed sensor wiring from the front brake hose.
E-150
3. Remove the wheel speed sensor nut and position the sensor aside.
^
To install, tighten to 11 Nm (8 ft. lbs.).
E-250, E-350 and E-450
