E 250 V8-4.6L VIN W (2006)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the fluid cooler tube(s) from the transmission.
^
To install, tighten to 20 Nm (15 ft. lbs.).
3. Disconnect the transmission fluid cooler hoses from the radiator.
4. Disconnect the transmission fluid cooler hoses from the auxiliary fluid cooler and remove the tubes.
5. To install, reverse the removal procedure.
^
Fill the transmission with clean transmission fluid.
^
Check for leaks.
