E 250 V8-4.6L VIN W (2006)
^
Tighten to 55 Nm (41 ft. lbs.).
6. Connect the transmission-mounted parking brake linkage.
1
Compress the spring on the actuating cable and install the cable into the cable housing.
2
Install the actuating cable end onto the actuating lever and install the pin.
3
Install the hair pin retaining clip into the pin.
4
Connect the return spring to the pin.
All vehicles
7. Install the driveshaft.
Extension Housing Gasket
Extension Housing Gasket
Special Tool(s)
Material
Removal
All vehicles
1. Remove the driveshaft.
Vehicles equipped with a transmission-mounted parking brake