E 250 V8-4.6L VIN W (2006)
2. Disconnect the transmission-mounted parking brake linkage.
1
Disconnect the return spring from the pin.
2
Remove the hair pin retaining clip from the pin.
3
Remove the pin from the actuating lever and move the actuating cable away from the actuating lever.
4
Compress the spring on the actuating cable and remove the cable out of the cable housing.
3. Remove the transmission-mounted parking brake.
1
Remove the transmission-mounted parking retaining bolts.
2
Keeping the vent in an upward position, remove the transmission-mounted parking brake assembly.
3
Remove and discard the transmission-mounted parking brake gasket.
Vehicles equipped with a fixed flange
4. Remove the output shaft flange.
1
Remove and discard the output shaft flange bolt.
2
Remove the output shaft flange.
All vehicles