E 250 V8-4.6L VIN W (2006)
Transmission Speed Sensor: Service and Repair
4R70E/4R75E - Automatic Transmission
Output Shaft Speed OSS Sensor
Output Shaft Speed OSS Sensor
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the output shaft speed OSS sensor electrical connector.
3. Remove the OSS sensor bolt and sensor.
^
Remove the OSS sensor bolt.
^
Remove the OSS sensor.
4. To install, reverse the removal procedure.
^
Tighten bolt to 12 Nm (9 ft. lbs.).
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor
