E 250 V8-4.6L VIN W (2006)
Seals and Gaskets: Service and Repair
Rear Drive Axle/Differential - Ford 9.75-Inch Ring Gear
Drive Pinion Seal
Special Tool(s)
Material
Removal
1. Remove the pinion flange.
2. Force up on the metal flange of the pinion seal. Install gripping pliers and strike with a hammer until the pinion seal is removed.
Installation
1. Lubricate the new pinion seal with grease.
2. CAUTION: If the pinion seal becomes misaligned during installation, remove the seal and install a new one.
Using the special tool, install the pinion seal.
3. Install the pinion flange.