E 250 V8-4.6L VIN W (2006)
8. Install the remaining bolts. Tighten the bolts alternately and evenly.
^
Tighten Grade 5 bolts to 47 Nm (35 ft. lbs.).
^
Tighten Grade 8 bolts to 61 Nm (45 ft. lbs.).
9. CAUTION: Allow one hour cure time before filling the axle with the correct amount of specified lubricant and operating the vehicle.
CAUTION: For limited-slip axles, first fill the axle with 0.2 liters (8 ounces) of friction modifier.
Fill the differential housing with 3.0L (6.3 pints) of the specified rear axle lubricant.
10. Install the brake disc.
11. Install the wheel and tire assembly.
12. Lower the vehicle.
