E 250 V8-5.4L (2008)
Rear door with E-Guard Cargo Protection System
5. Remove the 4 license plate housing screws.
6. Position the housing away from the door.
7. NOTE: The rear door exterior door handle is part of the license plate housing.
Disconnect the door latch cable.
8
NOTE: View of the door lock cylinder cover is from the bottom.
Release the 2 tabs on the door lock cylinder cover and slide it off the door lock cylinder.
Side door
9. NOTE: Use the special tool to install the exterior door handle assembly rivets.
Remove the 2 rivets.
10. Disconnect the actuating rod from the door handle.
All doors
11. NOTE: Use the special tool to install the exterior door handle assembly rivets.
To install, reverse the removal procedure.