E 250 V8-5.4L (2008)
-
To install, tighten to 48 Nm (35 lb-ft).
2
Remove the shoulder safety belt guide.
5. Remove the left and right B-pillar trim panels.
-
Pull at the top of the B-pillar trim panel and work downward.
6. If equipped, remove the screw and the overhead console.
-
Disconnect the electrical connectors.
7. Remove the first row of pushpins fastening the front headliner.
8. Pull the front headliner from underneath the front door opening weatherstrips.
9. Disconnect the wire harness at the B-pillar.
