E 250 V8-5.4L (2008)
13. Remove the front lower quarter trim panel.
1. Remove the screw.
2. Remove the 2 pin-type retainers.
3. Lift the front upper trim panel slightly upward and remove from the body side.
14. NOTE:
-
To install the front upper quarter trim panel, start at the lower pillar, then work to the second lower pillar.
-
To install the rear lower quarter trim panel, start with the clip to the heater housing, then snap the trim panel into the panel clips.
-
To install the rear upper quarter trim panel, start with the rear lower portion of the panel at the pillar.
To install, reverse the removal procedure.
