E 250 V8-5.4L (2008)
10. Remove the upper front quarter trim panel.
1
Remove the screw.
2
Remove the upper front trim panel.
11. Remove the lower rear quarter trim panel (extended wagon).
1. Remove the 2 screws.
2. Remove the pushpins.
3. Remove the lower rear quarter trim panel.
12. Remove the lower front quarter trim panel.
1. Remove the 6 screws.
2. Lift the lower front trim panel slightly upward and remove the panel from the body side.
13. NOTE:
-
Replace any metal clips to the quarter trim panel before installing.
-
To install the upper front quarter trim panel, start at the front lower corner, then work along the lower edge to the pillar.
-
To install the upper rear quarter trim panel, start at the front lower portion and work up the pillars.
